A coordinated Scaffolding Accessory range has been prepared for contractors, rental fleets and project suppliers assembling temporary access and support structures. The range covers steel tubes, couplers, joint pins, scaffold frames, steel planks, base jacks, U heads, casters, shoring props, prop sleeves and prop nuts.
Rather than treating accessories as separate replacement items, the range supports project-based equipment planning. Couplers can be matched with tube diameters, props can be selected by working height, and platforms can be completed with planks, frames, brackets and mobility components according to the required scaffold configuration.
Steel tubes remain the main building elements for many tube and coupler, frame and temporary support arrangements. The documented accessory range includes Q195, Q235 and Q345 steel options, with 48.3 mm and 60.3 mm tube diameters. Available tube lengths include 6 m and 12 m, while customized lengths can be considered for specific project requirements.
Tube weight options range from 3.56 kg per metre to 4.37 kg per metre. Wall thickness can be selected according to the required product configuration, with the product notes listing options from 0.8 mm to 12 mm. Galvanized surface treatment is available, subject to the selected tube specification and project requirements.
When preparing a material schedule, tube length should be considered together with the scaffold bay arrangement, transport limitations, cutting plan, connection positions and storage method. Standard tube lengths can support repeated layouts, while customized lengths may reduce unnecessary joints in specific access or support structures.
The accessory range includes British couplers in several configurations. A British swivel coupler connects tubes that meet at an angle, making it suitable for diagonal bracing, sloping structures and irregular access layouts. Listed weights are 0.99 kg and 1.12 kg according to the manufacturing process, with 48.3 x 48.3 mm and 48.3 x 60.3 mm size options.
British double couplers connect tubes at a fixed intersection. The documented weight options are 0.82 kg and 0.99 kg, with the same 48.3 x 48.3 mm and 48.3 x 60.3 mm size choices. British sleeve couplers join tubes end to end and are listed at 1.0 kg, with a 3.5 mm thickness.
For frame extension and vertical tube connections, inner joint pins are available in weights of 0.7 kg and 1.05 kg. Half couplers, board retain clamps, putlog couplers and girder couplers provide additional options for platform edges, board positioning and specialized structural connections.
| Accessory | Documented Options |
|---|---|
| Steel tube material | Q195, Q235 or Q345 steel |
| Steel tube diameter | 48.3 mm or 60.3 mm |
| Steel tube weight | 3.56 to 4.37 kg per metre |
| Steel tube length | 6 m, 12 m or customized |
| British swivel coupler | 0.99 kg or 1.12 kg; 48.3 x 48.3 mm or 48.3 x 60.3 mm |
| British double coupler | 0.82 kg or 0.99 kg; pressed or forged |
| British sleeve coupler | 1.0 kg; 3.5 mm thickness |
| British inner joint pin | 0.7 kg or 1.05 kg |
| British half coupler | 0.45 kg; 4.75 mm thickness |
| Board retain clamp | 0.56 kg or 0.61 kg |
| Putlog coupler | 0.57 kg to 0.63 kg |
| Girder coupler | 1.5 kg |
| Surface treatment | Galvanized or customized |
Steel shoring props are included for slab formwork, beam support and temporary structural support. The light duty steel shoring prop range includes adjustable lengths of 1.6 to 3.0 m, 1.8 to 3.5 m, 2.0 to 3.5 m, 3.5 to 4.0 m and 3.0 to 5.0 m.
The heavy duty range includes adjustable lengths of 1.8 to 3.2 m, 2.1 to 3.4 m, 2.2 to 4.0 m, 3.5 to 4.0 m and 3.0 to 5.0 m. Heavy duty props use internal tube options from 48 x 2 mm to 48 x 3.5 mm and external tube options from 60 x 2 mm to 60 x 3.5 mm. The listed square plate size is 120 x 120 x 4.5 mm.
Light duty props use internal tubes from 40 x 2 mm to 48 x 2 mm and external tubes from 48 x 2 mm to 56 x 2 mm. Their listed flower plate size is 120 x 120 x 4 mm. Both types use a G type lock pin and can be supplied with dip paint, pre galvanizing or hot dip galvanizing.
The final working load of a prop depends on extension length, spacing, alignment, bracing, base condition and the complete support design. The listed dimensions should therefore be used for product selection, while project engineers confirm the allowable load for the intended application.
Prop sleeves are used with compatible shoring prop components. The documented range includes Q235 material, diameters of 60 mm and 76 mm, lengths from 195 mm to 350 mm and thicknesses from 2.5 mm to 4.0 mm. Hole options include 14 x 150 mm and 15 x 160 mm.
Prop nuts are made from ductile iron casting and are available for 60 mm and 76 mm diameters. Listed weights include 270 g, 450 g, 560 g and 780 g. The nut can be supplied with or without a handle, while galvanized and black surface treatments are available.
The accessory range also includes scaffolding frames, steel scaffold planks, mobile scaffolding casters, base jacks and U heads. Frames can be selected for walk through, apartment, box, mason, ladder or shoring arrangements. Steel planks provide working surfaces, while casters support mobile platform configurations where the complete structure is designed for controlled movement.
Ring Lock components are also listed, including rosette steel bases, base collars, U ledgers, scaffold pins and base jacks. This allows accessory purchasing to cover several scaffold system families while keeping the compatibility review organized by tube size, connection type and intended use.
A project-ready Scaffolding Accessory package can be prepared from the required scaffold system, tube diameter, working height, platform arrangement and support schedule.