a modular Ring Lock Scaffold system has been released for construction access, temporary support and concrete formwork applications. Built around vertical standards, horizontal ledgers and diagonal braces, the system uses an eight hole rosette connection to create multiple connection angles at one node and form stable working platforms, stair towers, pier platforms and temporary support structures.
The system is available in 48 mm and 60 mm configurations. Its rosette has four smaller holes for ledger connections and four larger holes for diagonal braces, allowing the scaffold geometry to be adapted to different working heights, platform layouts and site restrictions. Wedge pin connections secure the ledger and brace heads to the standard, while the full welded connection between the tube and ledger head transfers forces through a three point loading structure.
Eight Hole Rosette and Three Point Force TransferThe rosette is the central component of the Ring Lock Scaffold system. Instead of requiring separate couplers for every ledger and brace connection, the node provides a fixed connection position for horizontal and diagonal members. This reduces the number of loose components that crews need to organize and allows several members to connect at the same level.
Four small rosette holes receive horizontal ledgers, while four larger holes receive diagonal braces. The arrangement supports multiple angles from one connection point, which is useful when building around columns, equipment bases, bridge piers, tanks and irregular building elevations. The diagonal brace head can rotate into the selected position before the wedge pin is driven into place.
Once the wedge pin is hammered down, the connection pulls the component head closely against the standard. The documented connection design uses three loading points to resist bending and reduce sliding at the joint. Vibration from the ledger is transferred through the standard toward the base, helping prevent the wedge pin from loosening during normal use. Final stability still depends on the complete scaffold design, including height, bay dimensions, bracing layout, anchorage, foundation condition and applied load.
Standard Components and System OptionsThe system consists of a base jack, base collar, standard, ledger, diagonal brace and adjustable U head jack. Standards build the vertical structure, while ledgers connect the standards and hold the scaffold bay geometry. Diagonal braces control lateral movement and improve the rigidity of the assembled frame.
Base jacks support the first standard at the required elevation and allow adjustment over the base condition. Base collars establish the first connection level above the base jack. At the top of a support tower or formwork arrangement, adjustable U heads receive timber beams, steel walers or other horizontal members. This makes the same Ring Lock Scaffold family suitable for access scaffolding and temporary concrete support.
| Parameter | Typical Range or Specification |
|---|---|
| System Configuration | 48 mm and 60 mm Ring Lock Scaffold systems |
| Standard Material | Q355B steel |
| Standard Tube | 48.3 x 3.25 mm or 60.3 x 3.25 mm |
| Standard Lengths | 1000 mm, 1500 mm, 2000 mm, 2500 mm and 3000 mm |
| Ledger Material | Q235B steel |
| Ledger Lengths | 600 mm, 900 mm, 1200 mm, 1500 mm, 1800 mm and 2100 mm |
| Diagonal Brace Layouts | 600 x 1500 mm to 2100 x 1500 mm typical configurations |
| Base Jack and U Head Lengths | 500 mm and 600 mm options |
| Surface Treatment | Powder coating or hot dip galvanizing |
| Typical Single Riser Capacity | 15 to 35 kN depending on system design and site conditions |
Installation begins with the adjustable jack bases positioned on a prepared and stable bearing surface. Base collars are then fitted to establish the first rosette level. Standards are placed into the base collars, followed by the first ledgers that define the bay length and width.
Diagonal braces are installed after the initial ledger frame is connected. The brace heads are placed into the larger rosette holes and secured with wedge pins. As the scaffold rises, additional standards, ledgers and braces are added level by level. The modular connection allows crews to build single or double row access scaffolds, independent towers, stairway towers and support structures for horizontal concrete work.
For formwork support, adjustable U heads are positioned above the standards to receive the primary beams or walers. The support arrangement should follow the approved engineering layout, with prop or tower spacing, bracing and working load checked before concrete placement. For access applications, steel planks, stair units, toe boards and guardrails can be added to create continuous working platforms and safe circulation routes.
Applications Across Construction and Civil EngineeringRing Lock Scaffold is suitable for industrial and civil buildings, bridge construction, tunnel works, factory structures, elevated water towers, power plants, refineries and temporary building structures. It can also be configured for pedestrian overpasses, storage platforms, chimneys, indoor and outdoor decoration, concert stages, viewing platforms and public access stairways.
The modular layout is particularly useful where one project combines several scaffold functions. A contractor may use the same standards and ledgers for a façade access platform, then reconfigure them into a concrete support tower, stair tower or pier working platform. This improves inventory flexibility without requiring a separate connection system for each task.
For contractors and rental fleets in Southeast Asia, the Middle East, Africa, Europe and Oceania, the system provides a structured component range for projects with changing heights and layouts. Product planning can include standard schedules, ledger lengths, diagonal brace arrangements, base conditions and U head requirements before production and delivery.